 |
 |
| |
| Add: |
Wangxi village, Dawang town, Dongying city |
| Tel: |
0546-6875078 |
| Fax: |
0546-6875680 |
| Web: |
www.dyxyxj.com |
| E-mail: |
dwliyangang1979@163.com |
|
|
 |
 |
Acetylene oxygen tube
 |
 |
| |
|
 |
 |
| |
|
 |
 |
| |
|
 |
 |
| |
|
 |
 |
| |
|
I have a professional company of senior engineering and technical personnel and advanced production lines, production of various models, specifications, Middle-oxygen acetylene hose, good quality and low prices, the widespread welcome customers, and the export of certain products. by foreign customers at home.
Main products and specifications
¦µ6 ¦µ8 ¦µ9 ¦µ10 ¦µ12 ¦µ13 |
Introduction letter
Weaving plastic products aerobic trachea, acetylene pipes, growing fast in recent separation welding plastic, large-calibre high-pressure pipes, high pressure gas control point , auto drain pipes, automotive exhaust pipe. |
| Weaving plastic tubes technical terms |
Name |
Nominal inside diameter |
Maximum working pressure
Mpa |
The smallest burst pressure
Mpa |
Length and tolerance
M |
Reference outer diameter
mm |
Colour |
Remarks |
mm |
inch |
S |
D |
S |
D |
S |
D |
Oxygen tube |
6.0¡À0.3 |
1/4 |
|
2.0 |
|
6.0 |
30¡À0.3 |
|
13.4 |
Red |
Rubber pipes
¡°D¡±expresses double thread
¡°S¡±expresses the single track |
8.0¡À¡À0.5 |
5/16 |
|
2.0 |
|
6.0 |
30¡À.03 |
|
15.2 |
Red |
10.0¡À0.5 |
3/8 |
0.5 |
2.0 |
|
6.0 |
30¡À0.3 |
|
17.1 |
Red |
Acetylene hoses |
6.0¡À0.3 |
1/4 |
0.5 |
|
1.5 |
|
30¡À0.3 |
12.9 |
|
Black |
8.0¡À0.5 |
5/16 |
0.5 |
|
1.5 |
|
|
14.3 |
|
Black |
10.0¡À0.5 |
3/8 |
0.5 |
|
1.5 |
|
|
16.2 |
|
Black |
Oil resistant rubber tube |
6.0¡À0.3 |
1/4 |
0.5 |
1.5 |
2.0 |
6.0 |
30¡À0.3 |
13.0 |
13.4 |
Black |
8.0¡À0.5 |
5/16 |
0.5 |
1.5 |
2.0 |
6.0 |
30¡À0.3 |
15.2 |
15.5 |
Black |
10.0¡À0.5 |
3/8 |
0.5 |
1.5 |
2.0 |
6.0 |
30¡À0.3 |
16.8 |
17.2 |
Black |
13.0¡À0.5 |
1/2 |
0.5 |
1.5 |
2.0 |
6.0 |
20¡À0.2 |
21.8 |
22.2 |
Black |
Fire hoses |
10.0¡À0.5 |
3/8 |
|
2.0 |
|
6.0 |
30¡À0.3 |
|
18.0 |
Black |
10.0¡À0.5 |
3/8 |
|
2.0 |
|
6.0 |
30¡À0.3 |
|
17.0 |
Black |
11.5¡À0.5 |
|
|
1.5 |
|
4.5 |
30¡À0.3 |
|
18.0 |
Black |
13.0¡À0.5 |
1/2 |
|
2.0 |
|
6.0 |
20¡À0.2 |
|
22.2 |
Black |
Air hoses |
13.0¡À0.5 |
1/2 |
|
2.0 |
|
8.0 |
20¡À0.2 |
|
22.2 |
Black |
16.0¡À0.5 |
5/8 |
|
2.0 |
|
8.0 |
20¡À0.2 |
|
25.0 |
Black |
19.0¡À0.75 |
3/4 |
|
2.0 |
|
8.0 |
20¡À0.2 |
|
31.5 |
Black |
Up plastic |
5.0¡À0.3 |
3/16 |
1.0 |
|
3.0 |
|
30¡À0.3 |
11.3 |
|
Black |
6.0¡À0.3 |
1/4 |
1.0 |
|
3.0 |
|
30¡À0.3 |
13.0 |
|
Black |
Water tube |
19.0¡À0.75 |
3/4 |
0.5 |
|
1.6 |
|
20¡À0.2 |
29.5 |
|
Black |
Steam heat pipes |
8.0¡À0.3 |
|
|
2.5 |
|
10.0 |
|
|
|
|
10.0¡À0.3 |
|
|
2.5 |
|
10.0 |
|
|
|
|
12.0¡À0.3 |
|
|
1.6 |
|
6.4 |
|
|
|
|
|
Attention to the use of plastic items :
1¡¢DD should be used in strict accordance with specifications species, not wrongly used, alternative
2¡¢In the use of plastic, not in point turns 90 degrees or higher in order to avoid local plastic deformation.
3¡¢Using the plastic strictly in the context of provisions of work pressure.
4¡¢When the rubber tube uses, not in its last reactor pressure heavy objects and other unnecessary machinery.
5¡¢When the rubber tube uses, it should be avoided whenever possible sun shone directly on the device near the heat device.
6¡¢The rubber tube should be washed clean inside (especially pipeline, spray pipes, etc.) after it was used.
7¡¢Choose a suitable form of metal connectors and specifications, reasonable connections to avoid injury lot. |
|
|
 |
 |
 |
|
